Meeting increasingly stringent
water and wastewater quality standards, Pantech engineers have designed
numerous additions and improvements for Water and Wastewater treatment
plants in South Carolina and Georgia. We specialize in design and
specification for Ethernet and wireless SCADA systems, medium and low
voltage power distribution for Aerobic and Anaerobic treatment as well as
flocculation, sedimentation, and filtration systems for water treatment.
Our designs incorporate reliable power distribution systems along
with standby generation to provide the stability and reliability these
facilities require.
Wastewater Treatment Plant Upgrade Dillon, SC – Electrical design of power
distribution and communications upgrade for Dillon and Cypress Pond Wastewater
Treatment Plant including new Bar Screen, new Aeration Basins, new Chlorine
Contact chamber, new 10,000sf building, replacement of existing 250HP Reduced
Voltage Autotransformer (RVAT) starters with new Variable Frequency Drives
(VFDs)., new motor control centers, transient voltage
surge suppression (TVSS), and new emergency standby generation to serve
approximately 3MGD addition to plant treatment process.
New
Wastewater Treatment Plant Cayce, SC – Electrical design of power distribution, and PLC-based
Supervisory Control and Data Acquisition (SCADA) system for new 25 MGD
Wastewater Treatment plant including Headworks, Aeration, RAS, WAS, Centrifuge,
Chlorination, two story Office building, emergency standby generation.
27kV double-ended metal-clad switchgear with generator control section,
23.9kV underground concrete-encased power loop, three phase, dead-front,
pad mounted transformers, low voltage switchboards, motor control centers,
TVSS, parallel 1500kW, 480V generators. Approximate project cost $52M.
New
Wastewater Treatment Plant Jessup, GA – Electrical design of power distribution and SCADA for new
3.5MGD Wastewater Treatment Plant including Bar Screens, Aeration Basins,
Sludge Holding, Centrifuge, Chlorine Contact chamber, Effluent Pump Station,
and Office building. Variable Frequency Drives (VFDs) with dv/dt filters
utilized to maximize process and minimize power consumption.
New
Wastewater Treatment Plants; BAHA Region - Saudi Arabia – Electrical design of power
distribution and SCADA system for nine (9) new Sewage Treatment Plants (STPs)
ranging in size from 1500 m3 per day to 12,500 m3 per day
including Bar Screens, Aeration Basins, Membrane Thickeners, Sludge Holding,
Centrifuge, Ultraviolet disinfection, Effluent Pump Station, and Chemical
Storage and pumping. Variable Frequency Drives (VFDs) were utilized to
maximize process and minimize power consumption.
Riverside
Water Treatment Plant #1 City of West Columbia, SC – Electrical design of new
480V, 2500A, three phase, service entrance with provision for future emergency
standby generator, power distribution, and PLC-based communications upgrade for
Water Treatment Plant including new Blowers, Lime Silo, New MIOX disinfection
system, upgrade of Flocculators and Sedimentation Basins, new Trac-Vacs, and
new motor control centers.
Greenhill
Standpipe City of West Columbia, SC – Electrical design for new emergency standby generator and
automatic transfer switch, new service entrance, modifications to existing
PLC-based SCADA system.
Platt
Springs Elevated Tank City of West Columbia, SC
- Power
distribution and communications upgrade for addition of altitude valve at
existing elevated tank.
Industrial & Domestic Water Supply Savannah. GA - Complete electrical design and
project management for power, instrumentation, controls, and SCADA for $15M
upgrade for the City of Savannah Industrial and Domestic Water Supply.
Also upfit of existing system, adding variable frequency drives, phase
protection, and lightning protection.
